{"product_id":"rms900108988","title":"Stator \u0026 Regulator Upgrade Kit - Suzuki DRZ400 (RMS900-108988)","description":"\u003cp\u003eBrand new aftermarket reliability upgrade kit featuring a 200W stator and SERIES voltage regulator.\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eDirect replacement for the original unit.\u003c\/li\u003e\r\n\u003cli\u003ePlug-and-play, direct fit and easy installation.\u003c\/li\u003e\r\n\u003cli\u003eHighest-grade lamination materials.\u003c\/li\u003e\r\n\u003cli\u003eHighest-grade copper windings, resistant to temperatures up to 200°C.\u003c\/li\u003e\r\n\u003cli\u003ePickup\/pulser coil included.\u003c\/li\u003e\r\n\u003cli\u003eConnectors included.\u003c\/li\u003e\r\n\u003cli\u003eRubber grommet included.\u003c\/li\u003e\r\n\u003cli\u003eAll products are tested before shipping.\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003e20% More Output Over Stock – Works with All Other OEM Components\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003eThe kit includes the opposite connector (main harness side), as these connectors are often melted, corroded or defective and can cause recurring electrical issues.\u003c\/p\u003e\r\n\u003cp\u003eAll product images are accurate. If in doubt, compare the item with the original part.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eBenefits of SERIES Voltage Regulators\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eSERIES regulators run much cooler than shunt and MOSFET voltage regulator\/rectifiers, as well as OEM units.\u003c\/li\u003e\r\n\u003cli\u003ePower only flows through the electrical components when the battery is charging.\u003c\/li\u003e\r\n\u003cli\u003eReduces current flowing through the stator when it is not in use, helping extend its service life.\u003c\/li\u003e\r\n\u003cli\u003eThe regulator is easier to mount because it is smaller than the OEM unit.\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003eAbout SERIES Voltage Regulation Technology\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003eRMSTATOR's SERIES voltage regulator provides improved reliability and charging system performance. A SERIES regulator is a significant upgrade over typical shunt-type voltage regulators.\u003c\/p\u003e\r\n\u003cp\u003eA shunt regulator controls battery voltage by grounding the stator coils to dissipate current as heat rather than sending it to the battery. SERIES regulators control battery voltage by intermittently disconnecting the stator coils from the regulator electronics, limiting current flow through the unit and to the battery.\u003c\/p\u003e\r\n\u003cp\u003eThis results in lower regulator and stator temperatures, more accurate voltage regulation and increased reliability of the charging system components.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eAbout the Bypass Harness\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003eThis bypass harness allows you to connect the new SERIES regulator directly to the battery. It bypasses sections of wiring and multiple connectors in the main wiring harness, providing a safer and more direct connection.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eBefore Installing the New High-Output Stator and SERIES Voltage Regulator\/Rectifier\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eCheck the AC output of the stator.\u003c\/li\u003e\r\n\u003cli\u003eReplace any burned or corroded connectors on the stator and regulator\/rectifier.\u003c\/li\u003e\r\n\u003cli\u003eCheck and repair any melted wiring.\u003c\/li\u003e\r\n\u003cli\u003eUse high-temperature dielectric grease on all connectors.\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003eThe stator may use a different wire colour code from the original part. All wires are installed in the correct order; do not change any wiring configurations. This stator is designed as a direct plug-in replacement and should be used as such.\u003c\/p\u003e\r\n\u003cp\u003eWhen bolting the stator in place, always use thread-locking compound. If the stator includes a pickup coil, ensure the air gap is correctly adjusted during installation. We recommend setting it as close as possible, but no less than 0.010\".\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eWarning:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003eRisk of electric shock. Disconnect the battery before servicing. Ensure proper installation by a qualified technician to avoid malfunction.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eStator Specifications\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eDimensions:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eInterior diameter: 35 mm\u003c\/li\u003e\r\n\u003cli\u003eExterior diameter: 93 mm\u003c\/li\u003e\r\n\u003cli\u003eThickness: 16 mm\u003c\/li\u003e\r\n\u003cli\u003eWire length (stator to grommet): 140 mm\u003c\/li\u003e\r\n\u003cli\u003eWire length (grommet to plug): 540 mm and 670 mm\u003c\/li\u003e\r\n\u003cli\u003ePickup coil wire length (to grommet): 110 mm\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003eOther Specifications:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eNumber of wires: 7\u003c\/li\u003e\r\n\u003cli\u003eNumber of plugs: 2\u003c\/li\u003e\r\n\u003cli\u003eNumber of pins: 7\u003c\/li\u003e\r\n\u003cli\u003eNumber of poles: 18\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003eWire-to-Wire Resistance:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eAlternator (Yellow to Yellow): 0.6 ohms ±20%\u003c\/li\u003e\r\n\u003cli\u003eAlternator (Yellow to ground): O.L.\u003c\/li\u003e\r\n\u003cli\u003ePickup coil (Blue to Green): 445 ohms ±20%\u003c\/li\u003e\r\n\u003cli\u003ePosition sensor (Black to White): 0.2 ohms ±20%\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003eSERIES Regulator Specifications\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eDimensions:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eWidth: 84 mm\u003c\/li\u003e\r\n\u003cli\u003eLength: 90 mm\u003c\/li\u003e\r\n\u003cli\u003eHeight: 32 mm\u003c\/li\u003e\r\n\u003cli\u003eMounting hole centres: 69 mm\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003eOther Specifications:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eNumber of plugs: 2\u003c\/li\u003e\r\n\u003cli\u003eNumber of pins: 5\u003c\/li\u003e\r\n\u003cli\u003eMinimum charging voltage: 14.5 V ±0.5 V\u003c\/li\u003e\r\n\u003cli\u003eMaximum charging current: 50 A \/ 500 W\u003c\/li\u003e\r\n\u003cli\u003eOpen-circuit voltage: \u0026lt;15 V\u003c\/li\u003e\r\n\u003cli\u003eOperating temperature: -20°C to 85°C\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003eBypass Harness Specifications\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eDimensions:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eWire length: 640 mm\u003c\/li\u003e\r\n\u003cli\u003eNumber of plugs: 3\u003c\/li\u003e\r\n\u003cli\u003eNumber of pins: 5\u003c\/li\u003e\r\n\u003cli\u003eNumber of wires: 5\u003c\/li\u003e\r\n\u003c\/ul\u003e","brand":"RMSTATOR","offers":[{"title":"Default Title","offer_id":57610576887972,"sku":"RMS900108988","price":679.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0288\/6133\/3563\/files\/RMS900108988.jpg?v=1793940499","url":"https:\/\/adventureonstore.com.au\/products\/rms900108988","provider":"Adventure On Store","version":"1.0","type":"link"}